Anime Rail Bridge Scene

[linkey]

Just recently I have brought the KATO double truss bridge and a double track girder to create a anime bridge scence that you get from seeing a few anime shows of trains going over with walkways for people underneath.

This going to be a challenge for me as this will be done by using the KATO standard module (900mm x 3000mm) to create it.

So the items I have so far is:
1x KATO Double Track Girder
2x KATO Double Truss Bridge
2x 62mm double track
4x Greenmax Wall C

I also have the double pier No.5 legs too

At the moment I can place the image in my head but haven't drawn it down so far. when I do I will scan it and add it on here.
 

[cteno4]

linkey,

3m long x 0.9m wide? thats a big module!

[linkey]

linkey,

3m long x 0.9m wide? thats a big module!

I just realised I added an extra 0 in the 300mm lol... So it should be 900mm x 300mm module. Thanks Jeff for that pick-up

Just connected the Double Truss Bridges and the Drouble Track girder and found out that I would have just over 124mm spare before the expanding track get added on both sides, so I might get the 2x 62mm double tracks to be placed on either side to work out the mid point for the bridges.

linkey