Jump to content

Tomix 91016/91017 yard


sandiway

Recommended Posts

This set looks interesting:

 

https://www.tomytec.co.jp/tomix/products/n/91016.html

https://www.tomytec.co.jp/tomix/products/n/91017.html

 

You can iterate 91017 as many times as one needs to get the length one desires.

 

The thing is it's kinda of a half-assed Wide PC track, half regular Finetrack thing. Especially this picture:

 

91017_c.jpg

Does anyone know if this attachable ballast kit for converting regular Fine Track into wide PC track can fill in the gaps near the points properly?

 

https://www.tomytec.co.jp/tomix/products/n/3034.html

 

3034.jpg

 

  • Like 1
Link to comment

These are re-releases.

 

No you cannot add those PC wide pieces completely.

 

The tracks in these yard sets use the station PC wide track pieces, so ballast one side and nothing the other.  Then placed 18.5mm apart instead of 37mm apart.  The washing and walkway stable road is 37mm apart though.

  • Like 1
Link to comment
On 9/7/2018 at 2:04 PM, katoftw said:

The tracks in these yard sets use the station PC wide track pieces, so ballast one side and nothing the other.  Then placed 18.5mm apart instead of 37mm apart.  The washing and walkway stable road is 37mm apart though.

Oh well. Also I just noticed the points are not electric.

Link to comment

Actually the points part is just a track set you can assemble yourself from powered points or as Katoftw has said, you can just buy the motors as add-ons. The filler pieces are usable, you just have to cut some of them in half. The same is true for the wide pieces, they have half of the sides removable so you can use standard wide pieces to extend the tracks. Also you can get the same buffers separately and those would also come with lights. The overhead is just from a standard adjustable assemble kit, i've used it to build catenary for a ttrak station with Kato unitrack. The only special and new pieces are the pedestrian crossing tracks as afaik the washing equipment was also available in a separate kit in the past. It's just a very nice, fully picked and packaged set, so you can use it out of the box and don't have to assemble it from dozens of different packs.

Link to comment

I have the extension set without the basic set, since technically I only need the crossing pieces which look really nice, along with the bits and pieces. Effect of the finished yard with the new pieces are great!

 

 

20180602_162936.jpg

20180602_162909.jpg

20180602_133508.jpg

  • Like 5
Link to comment
5 hours ago, JR 500系 said:

I have the extension set without the basic set, since technically I only need the crossing pieces which look really nice, along with the bits and pieces. Effect of the finished yard with the new pieces are great!

The S35 crossing pieces seem unique to this set as far as I know. They are very nice indeed!

Link to comment
5 hours ago, JR 500系 said:

 

20180602_162936.jpg

 

 

Maybe I am misinterpreting what katoftw said ("Then placed 18.5mm apart instead of 37mm apart"). I guess the extra yard-specific bits are 18.5mm wide, and so the tracks end up being 37mm apart here... correct?

Edited by sandiway
Link to comment
3 hours ago, sandiway said:

Maybe I am misinterpreting what katoftw said ("Then placed 18.5mm apart instead of 37mm apart"). I guess the extra yard-specific bits are 18.5mm wide, and so the tracks end up being 37mm apart here... correct?

No the yard specific crossing parts are one 37 mm and the rest is 18.5 mm. This means one track distance could be at standard and the rest must be at half distance. Wide tracks have removable ballasts on one side, allowing this easily.

  • Like 1
Link to comment
1 hour ago, kvp said:

No the yard specific crossing parts are one 37 mm and the rest is 18.5 mm. This means one track distance could be at standard and the rest must be at half distance. Wide tracks have removable ballasts on one side, allowing this easily.

OK, now I get the (clever) idea. So I could design this yard - 5 tracks all narrow with available parts.

Screen Shot 2018-09-10 at 3.24.22 PM.png

Link to comment

Looks like three judging by the photos of the included parts in the links provided above.]]
But it will depend on how wide you make the yard.  There may be only enough pieces to make two.

 

It's a buildable catenary using 37mm and 18.5mm pieces to make on big wide catenary.

 

These:- https://www.tomytec.co.jp/tomix/products/n/3007.html + https://www.1999.co.jp/eng/image/10150036

Edited by katoftw
Link to comment
10 minutes ago, katoftw said:

Looks like three judging by the photos of the included parts in the links provided above.]]
But it will depend on how wide you make the yard.  There may be only enough pieces to make two.

 

It's a buildable catenary using 37mm and 18.5mm pieces to make on big wide catenary.

 

These:- https://www.tomytec.co.jp/tomix/products/n/3007.html + https://www.1999.co.jp/eng/image/10150036

 

I have this set. I expected that it would be flimsy, at first when I saw how you put it together by joining lots of small segments. But it's surprisingly strong. Really, a great product.

Link to comment

(Forgive my newness at yard design.) Other possible designs using this narrowTomix spacing. Differences of course in terms of parking space.

 

4yard.png

4yard2.png

Edited by sandiway
  • Like 1
Link to comment
2 hours ago, sandiway said:

For a yard with 5 instead of 4 tracks, I came up with these. Again, differences of course in terms of parking space.

5yard2.png

5yard3.png

 

I vote for the second one. 

Edited by gavino200
  • Like 1
Link to comment
3 hours ago, sandiway said:

For a yard with 5 instead of 4 tracks, I came up with these. Again, differences of course in terms of parking space.

 

5yard3.png

 

I also vote for this... But do remember, if you like to use the yard parking set, then you need to have a 37' length for the railway crossing right before all that straights, and they need to be aligned together in a straight line for it to look nice, so I reckon it should be at where the top 2nd and 3rd curves (C280-15 & C541-15) stops.  

  • Like 1
Link to comment
1 hour ago, JR 500系 said:

But do remember, if you like to use the yard parking set, then you need to have a 37' length for the railway crossing right before all that straights, and they need to be aligned together in a straight line for it to look nice, so I reckon it should be at where the top 2nd and 3rd curves (C280-15 & C541-15) stops.  

Good point. I revise the design to this then.

5yard4.png

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...