Jump to content
JNS Forum
Melandir

Italian Maglev project

Recommended Posts

It looks like this Italian startup created a maglev technology prototype that does not need special infrastructure and can use standard rails with a reduced energy requirement

 

I hope they will be able to be successful

 

company website

http://www.ironlev.com/

 

one article on the topic (Italian), maybe in a few days some article in english will appear

 

http://www.repubblica.it/economia/2018/02/07/news/ironlev_il_treno_a_levitazione_magnetica_made_in_italy-188201462/

 

 

  • Like 2

Share this post


Link to post
Share on other sites

Suspect 

 

 without the expenditure of electricity ". 
 

Ok no free lunch...

 

jeff

  • Haha 1

Share this post


Link to post
Share on other sites

This is a self levitating permanent magnet based system. The idea is similar to the static magnetic desk ornaments.

 

Now the hard part. First, the power to levitate was added during magnet construction. Second there is no way to move on its own. Third, the power required to move it is a poduct of the holding force and the distance. This means the mover has to act against the levitating magnets and the faster you want to go, the stronger force you'll need. Fourth, the magnetic field needs time to form, so above a certain speed, the field will collapse. This is determined by the magnets, the rails and the geometry of the whole setup. Fifth the magnets would demagnetize over time as the moving forces constantly act against their field.

 

Imho if you want to go fast and propel yourself you need to alter the magnetic field at the frequency of the desired speed. This would need roughly the same power as the pulling power exerted on a static magnet system (without conversion losses).

 

Just my 2 cents...

  • Like 1

Share this post


Link to post
Share on other sites

Another issue I have read about it, is that they have not a clear view on how change the train direction on rail switches, currently the prototype can't do that (train will just go straight) and they are working on it

 

there is no need of electricity to sustain the train, but you need it to move it.

 

Let's see how this idea will develop, and even if they fail maybe someone after them will be able to make an use of their ideas

Share this post


Link to post
Share on other sites

It's probably not a coincidence that all the successful high speed trains so far with the possible exception of the Chuo Shinkansen, but it's still a long way from regular service, are stock standard flanged steel wheels on steel rails that has been tried and proven technology since the 19th century.

Share this post


Link to post
Share on other sites
On 2/10/2018 at 3:44 PM, kvp said:

Fifth the magnets would demagnetize over time as the moving forces constantly act against their field.

 

so.. if a magnet is constantly used, it will use their magnetism over time?

 

btw don't magnets only gets demagnetized under high temperature?

 

Share this post


Link to post
Share on other sites
26 minutes ago, HantuBlauLOL said:

don't magnets only gets demagnetized under high temperature?

High temperature causes immediate loss as the magnetic poles could move around and realign randomly with an average sum of zero.

 

Prolonged load weakens the magnetic poles and slowly demagnetizes the material.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×