Jump to content

How did you improve your rolling stock?


Densha

Recommended Posts

Das Steinkopf

Fitted Tomix 0337 TN’s to my Tomix 313-2300’s and my Greenmax 211-5000 LL Sets last night, photos of the latter attached.

 

 

D1485696-B2EC-4A5F-84AD-7FE6FADA8609.jpeg

7CDD340B-4623-4636-A7A2-8F19FF07D340.jpeg

  • Like 5
Link to comment

And another MicroAce "poor runner" acquired very cheaply passes through the Railsquid Workshops :D

 

 

 

  • Like 7
Link to comment

Wow! What an improvement, just lubing?

 

I imagine this workshop being a long Tomix engine shed with tentacles coming from all over the ceiling...

 

jeff

  • Haha 1
Link to comment
4 minutes ago, cteno4 said:

Wow! What an improvement, just lubing?

 

 

Yup.

 

The trick is to apply grease to the ends of the worm gear, where it sits inside the little "O"-shaped parts, i.e. the circular bit just to the right of the toothpick here:

 

48078868691_d274521877_z.jpg

MicroAce 209-500 series maintenance by Rail Squid, on Flickr

 

This pretty cures the "clicky vibration" sound, which I presume is caused by the ends of the worm gear vibrating very slightly within the "O" parts. Works every time.

 

  • Like 2
  • Thanks 2
Link to comment

Yeah same experience! Although I have one I need to do a total teardown as basic lubing didn’t work.

 

jeff

Link to comment

Indeed. I usually end up taking them all apart to remove the residue from previous owners' basic lubing attempts as well as their assorted fibre collection.

 

The odd thing with this one is that someone had clearly worked on it before, as the plastic tabs holding the interior floor in place weren't in pristine condition, and part of the chassis had been drilled out underneath where the armature comes out of the motor:

 

48343639666_babfb6c7ef.jpg

MicroAce E231-0 series by Rail Squid, on Flickr

 

48343639756_63c5868134.jpg

MicroAce E231-0 series by Rail Squid, on Flickr

 

I guess the/a previous owner thought the mechanism was hitting the bottom of the chassis and wanted to create some clearance for it.

  • Confused 1
Link to comment
4 hours ago, cteno4 said:

I imagine this workshop being a long Tomix engine shed with tentacles coming from all over the ceiling...
 

 

Something like this?

 

railway-workshop.jpg.b7df4783d23ac925967d94d04290771e.jpg

  • Haha 7
Link to comment

Actually I was thinking more of the Decapodiformes variety of arms and the pair of tentacles for the tough repairs to boot! I thought railsquid would think we don’t need no stinkin Octopodiformes!

 

jeff

Link to comment

I worked out why the koki 107 was derailing going over the crossover—and why it was so difficult to re-rail it afterwards. 

5280F000-E025-442E-8328-BDF69F8F3414.thumb.jpeg.4f47f63bc2602c753b2d8b91b1690934.jpeg

I’d put too much pressure on it, trying to get the 31ft containers mounted. (I didn’t realize that there needs to be a space between them, big enough for the central mounting nub.)

90E535F5-C461-4ED4-97FF-E120CE6D0937.thumb.jpeg.53e5c555e355c7a572c16210392530ee.jpeg

 

Not at all difficult to fix, once I could see the problem. Now running smoothly!

 

 

  • Like 7
Link to comment
18 hours ago, lighthouse said:

Out of boredom I put together a fictional SL train - SL C62 with ED76-522 🤣

Would be a great train today between Moruran and Asahikawa

 

768272621_SLC62ED76-500.thumb.jpg.ab764aff0794daaefa3e629fbbb70a91.jpg


Nice! Still wondering in which way this is an improvement? Are we missing a thread for special consists we sometime make of our trains? Like, "What did you ran today?"

Edited by disturbman
Link to comment

A while back I acquired a bunch of "junk" MicroAce 101 series cars mainly for parts extraction, but they also make excellent guinea pigs for experimenting with various improvements.

 

Here the plastic "push-fit" destination headboard from a Kato 101 series has been added; it's almost an exact fit:

 

48422541327_c1fb66289a_z.jpg

MicroAce 101 series (junk) - destination board replacement by Rail Squid, on Flickr

 

though to get it in depth-wise, I needed to shorten the lighting unit prism, in the process of which I knocked off the section main headlight. It can probably be glued into place when I get round to it - it's an experiment after all.

 

The most annoying visual feature of older MicroAce units is the dark blue interior used, which really stands out; painting the cab interior in metallic green (Gundam Colour "MS Green") makes a big difference  (and also makes it easier to see the detail inside the cab, which is minimal but I didn't realise it was there at all...)

 

48422541202_6bfc302277_z.jpg

MicroAce 101 series (junk) - cab interior repaint by Rail Squid, on Flickr

 

More to follow as time permits...

  • Like 5
Link to comment

I do like MicroAce stuff, partly because a lot of the older models can be purchased by the bucketload and can be fixed up quite easily, but they do like to keep a bit of space between cars:

 

48516409136_1bc2ef9e84_z.jpg

MicroAce 115-800 series by Rail Squid, on Flickr

 

Nothing which can't be fixed with some Tomix close couplers though:

 

48516583212_105fdb11de_z.jpg

MicroAce 115-800 series by Rail Squid, on Flickr

 

(Corridor connector on the KuHa is a little loose, will fix another time).

  • Like 1
Link to comment

Some simple pin washing with some diluted black Tamiya enamel and a little white enamel, bring out the details on this DD54.

 

You can see the difference compared to another DD54 I have.

11EA3AD7-C536-4C04-B4E4-F1406679FBAA.jpeg

266837A8-DB8E-4DD2-8644-746B0E37F5F7.jpeg

7FDA75A4-48F8-4B93-8983-B21F5984B329.jpeg

  • Like 10
Link to comment

Thanks @katoftw

 

Its a very simple technique and you have full control of how heavy or light you want to take it. The enamel comes off very easily if you make a mistake. 

 

I do think “the less is more” when weathering n scale.

Link to comment
19 minutes ago, RogerMc said:

Was the white used on the roof or for a subtle fade of the red? Nicely done.

Thanks.

Nothing done to the roof as yet other than a black pin wash. Just the light on the photo. The white was used to outline the ladders. Any overspill can be tidied up with some thinners so you get crisp lines.

 

I will airbrush some soot once I’m clear on where the exhaust was. Lots of photos have soot covering the side as the DD54 were pretty smoky things. I’ve not found a photo of the roof to give a clear impression of where the majority of soot accumulated.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...