Jump to content
Sign in to follow this  
Kb4iuj

Where can I get a 1/150 scale rule

Recommended Posts

Kb4iuj

Does anybody know if on that big Tomix Track planning thing if there is a 1/150 on its edge?

  • Like 1

Share this post


Link to post
bill937ca

If there is a rule on the track planning template it would be metric (mm). I use Japanese metal rulers from HS for most of my planning and stickers.

Edited by bill937ca

Share this post


Link to post
cteno4

Really close is 2mm equals 1' scale (w/in 2%).

 

You can print one out here

 

https://printable-ruler.net/scale-rulers/

 

http://www.blocklayer.com/scale-rule.aspx

 

Or buy one

 

WARNING THIS ONE DOES NOT HAVE 1/150 ON IT!

 

http://www.ebay.com/itm/300mm-1-150-1-200-1-250-Triangular-Metric-Scale-Ruler-For-Engineer-Multicolor-/201601156917?hash=item2ef05d8735:g:TicAAOSwyjBW8J~J

 

Jeff

Edited by cteno4
  • Like 1

Share this post


Link to post
velotrain

 

Just a warning - I ordered the ruler on eBay as it seemed like a good deal, and it would have been - if the listing was accurate!

 

The ruler they sent is very nice, but it does NOT have a 1:150 scale as they claim it does.

 

It has 100, 200, 250, 300, 400, and 500 - but no 150 !

 

I told them I wanted a ruler that does have 1:150 ASAP, or I'll tell eBay their listing is false. We'll see what happens.

Share this post


Link to post
cteno4

I just got mine yesterday and same thing! Bummer, but they refunded my money when I contacted them.

 

Jeff

Share this post


Link to post
velotrain

Well, I decided to first see if they can correct the situation - which I tend to doubt.

 

They must have written the listing using Chinese ratios ;-)

 

Still hard to comprehend getting that wrong?

 

Oh, the irony of it - the missing scale is the only one I cared about!

Share this post


Link to post
sandiway

The Tomix stencil is at 1/10 and has the straights etc. on an edge. And a regular mm ruler on the bottom.

Share this post


Link to post
cteno4

Three sheep design has a small one in m and ft for 300¥. Sadly currently back ordered. I got one and it’s nice but being just etched metal it’s a bit hard to read. I many try some contrast paint in the etched bits.

 

jeff

 

 

55B34088-A44A-435D-907E-E117400366A7.jpeg

Share this post


Link to post
Sheffie
1 hour ago, cteno4 said:

Three sheep design has a small one in m and ft for 300¥. Sadly currently back ordered. I got one and it’s nice but being just etched metal it’s a bit hard to read. I many try some contrast paint in the etched bits.

 

jeff

 

 

55B34088-A44A-435D-907E-E117400366A7.jpeg

That sounds like a job for a gundam marker pen

Share this post


Link to post
cteno4

Actually probably too fine of etched grooves for them except for the paint markers. I was just going to try some enamel paint to see if any would work and do the printers plate thing of just burnishing the paint into the etched areas and clean off the surface. 

 

With the fine paint marker marker I could do the half marks a different color though! 

 

Jeff

Share this post


Link to post
toc36
RogerMc

Be careful, I think the multicolor one is incorrectly stated as having 1:150. The silver one does have it, GREAT find!

Share this post


Link to post
cteno4

Only problem is they are metric, not English. Sadly pretty hard to get an English 1/150 scale. Few printable ones but most are metric.

 

2mm to the foot is pretty close.

 

jeff

Share this post


Link to post
maihama eki
Posted (edited)

A photo of all of my n scale rulers.  Sadly, I thought I may have even more different ones, but today I could only lay my hands on these 3.

 

The one in the front - stainless steel, is a the very common (in the U.S.) General model railroad ruler.  It has several scales - "N GAGE"1/160 is on the back - in English units (feet).  It is readily available online from many places.  I think some others sell a very similar one with their name on it.

 

The one in the middle is an architect's scale from Bocianelli.  It has a variety of scales including 1:150 - in Metric (meters).  It was on Amazon ... but maybe no longer

https://www.amazon.com/Professional-Metric-Triangular-Aluminium-Metal/dp/B00C67VD4C/ref=cm_cr_arp_d_product_top?ie=UTF8 

 

The one in the back is from Modemo.  It has both 1/150 and 1/160 - in Metric (meters).  Hobby Search https://www.1999.co.jp/eng/10213586 

 

 

NScaleRulers.thumb.jpg.4a6820debaa27a7528afea63bf1e7763.jpg

Edited by maihama eki
  • Like 1

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×